Кондиционер IdeaPro SARDIUS IPA-24HR-FN8 ION (JN model)

Blue fin heat exchanger cover - Protection against corrosion. Special anti-corrosion coating of the heat exchanger, protection from atmospheric phenomena and effects of aggressive environment.

Gold plating fin heat exchanger - Corrosion protection. Special anti-corrosion coating of the heat exchanger, protection from atmospheric phenomena and effects of aggressive environment.

Increased heat. This unit uses the heat exchangers with tubes of a special design, the inner surface of which has trapezoidal notches "Innergrove cooper", which provides maximum heat transfer surface area increased. Due to this heat increases by 28%, reduced power consumption, and hence increases the efficiency of the system.

The "Silence" - air conditioning reduces the fan speed of the indoor unit to a minimum, with the noise of the air conditioner as well reduced.

Technology 180° -gradusnogo wave inverter conversion - control voltage without the "pulse" effects (jagged sinusoid).

Compared with the current standard of 120° rectangular wave has the following advantages:

1. Ability to work with a wider range of supply voltage and frequency.
2. Most of the energy efficiency and energy conservation.
3. More soft start, lower noise and vibration.
4. more control.

Conditioners can optionally be equipped with a Wi-Fi module that allows the user to monitor and remotely control the air-conditioner from a smartphone or tablet from anywhere in the world.

Compressor with inverter DC can increase the efficiency of the air conditioner, thus reducing power consumption saves your costs. This system is much more economical and safer than air conditioners with a constant output of the compressor.

The indoor unit is used to rotate the impeller DC - motor. This can significantly reduce noise and power consumption. And also get 12 positions change the speed of the impeller.

Mode is activated with the remote control and provides a comfortable environment for a peaceful and deep sleep during the 7-hour cycle with a temperature change of reference values​​, as well as setting the minimum noise level and economical energy consumption. After that, the temperature returns to the originally specified value.

Подогреватель поддона наружного блока устанавливается для обеспечения полного удаления воды образовавшейся в результате оттайки теплообменника наружного блока, после проведении режима "разморозки". Может изготавливаться из различных материалов.

All engines compressors and fans in the system are made by DC-inverter technology.