Suggested retail price
Energy Efficiency
Technology
Blue Fin
Blue fin heat exchanger cover - Protection against corrosion. Special anti-corrosion coating of the heat exchanger, protection from atmospheric phenomena and effects of aggressive environment.
Multi-Bend Heat Exchanger
Increased heat. This unit uses the heat exchangers with tubes of a special design, the inner surface of which has trapezoidal notches "Innergrove cooper", which provides maximum heat transfer surface area increased. Due to this heat increases by 28%, reduced power consumption, and hence increases the efficiency of the system.
Sine-Wave Inverter
Technology 180° -gradusnogo wave inverter conversion - control voltage without the "pulse" effects (jagged sinusoid).
Compared with the current standard of 120° rectangular wave has the following advantages:
- Ability to work with a wider range of supply voltage and frequency.
- Most of the energy efficiency and energy conservation.
- More soft start, lower noise and vibration.
- more control.
Compresor DC inverter
Compressor with inverter DC can increase the efficiency of the air conditioner, thus reducing power consumption saves your costs. This system is much more economical and safer than air conditioners with a constant output of the compressor.
Full-DC (3D DC-inverter)
All engines compressors and fans in the system are made by DC-inverter technology.
Description
Multi-split systems Idea PRO Series allow you to connect to a single outdoor unit to the indoor unit 5, which reduces the number of outdoor units and allows, thus saving installation space. All indoor units may be controlled separately and is optionally mounted simultaneously (that is convenient for example when the repair in some areas have already been made, and still continues in the other).
Cutting-edge inverter technology DC sine waves and the technology of active power factor correction ensure low noise and economical operation.
The total length of the route and maskimalnuyu height difference between outdoor and indoor units reaches respectively 60 m and 10 m, which allows you to conveniently place the indoor and outdoor units, making installation simple and flexible system.
Multi-split system can be operated in cooling at low temperatures (up to -10C) in the street.
Attention! If one (or more) of blocks included in the cooling, the remaining indoor units in the mode "heating" switch NOT!
Specifications
|
Модель |
I5O-42PA7-FN1 |
||
|
Производительность |
Охлаждение/Обогрев |
БТЕ/Ч |
42000(9450-43150)/43000(10100-44800) |
|
кВт |
12.00(2.77-12.7)/13.0(2.96-13.1) |
||
|
Электрические данные |
Электропитание |
В~,Гц,Ф |
220~240,50,1 |
|
Потребляемая мощность (охлаждение/обогрев) |
Вт |
3600/3650 |
|
|
Рабочий ток (охлаждение/ обогрев) |
A |
16.0/16.5 |
|
|
Рабочие характеристики |
SEER/SCOP |
Вт/Вт |
6.02/4.28 |
|
ERP класс |
|
A+/A+ |
|
|
Расход воздуха |
м3/ч |
5500 |
|
|
Уровень звукового давления |
дБ(А) |
57 |
|
|
Уровень звуковой мощности шума |
дБ(А) |
65 |
|
|
Габариты (Д×Ш×В) |
Без упаковки |
мм |
940×368×1366 |
|
С упаковкой |
мм |
1080×460×1500 |
|
|
Вес |
Нетто/Брутто |
кг |
97/110 |
|
Диаметр труб |
Жидкость |
мм |
5×6.35(1/4) |
|
Газ |
мм |
5×9.52(3/8) |
|
Images Additional
